Salt Lake City Municipal Water Test Results

Utilities and Infrastructure Utah 4 Minutes Read ยท published February 10, 2026 Flag of Utah

Salt Lake City, Utah publishes water quality information through municipal utilities and state oversight. This guide explains where to find official test results, annual Consumer Confidence Reports (CCR), lab data access, and how to report concerns about drinking water in Salt Lake City.

Where to find official water quality results

The Salt Lake City Department of Public Utilities posts drinking water quality summaries, annual water quality reports, and notices about contaminants on its utilities web pages. [1]

Check the annual Consumer Confidence Report first for system-wide results.

The Utah Division of Drinking Water maintains state oversight records, compliance actions, and sampling requirements that apply to municipal systems; state pages can show enforcement actions and public notices. [2]

Common types of published water data

  • Annual Consumer Confidence Report (CCR) showing regulated contaminant levels.
  • Monthly or event-driven sampling summaries for coliform, lead, copper, and disinfectant residuals.
  • Special notices for boil-water advisories, contamination events, and remediation steps.

Penalties & Enforcement

Enforcement for municipal drinking water violations is coordinated between the Salt Lake City Department of Public Utilities (local enforcer for system operation) and the Utah Division of Drinking Water (state regulator that can issue orders and penalties). If you need to report noncompliance or request inspection, contact the city utilities office or the state division as listed below.[2]

Serious contamination events can trigger public notices and corrective orders from the state or city.
  • Monetary fines: not specified on the cited page.
  • Escalation: first/repeat/continuing offence procedures and ranges: not specified on the cited page.
  • Non-monetary sanctions: administrative orders, required corrective action plans, public notices, and possible court enforcement (where authorized by state law).
  • Enforcer and inspection pathways: Salt Lake City Department of Public Utilities and Utah Division of Drinking Water; use official contact pages in Resources.
  • Appeal/review: appeal or review routes are handled through administrative procedures described by the Utah Division of Drinking Water or municipal administrative appeals; specific time limits: not specified on the cited page.
  • Defences/discretion: variances, approved monitoring waivers, or treatment plans may be available under state rules; check the state division for eligibility and application details.

Applications & Forms

The city publishes water quality reports and contact forms for customer inquiries; formal permit applications, monitoring waiver requests, and enforcement documents are administered by the Utah Division of Drinking Water. If a specific municipal form is required, it will be linked on the city utilities page or the state division site; otherwise, no single municipal form for public data requests is specified on the cited page.[1]

How to access raw lab data or specific sample results

  1. Start with the latest Consumer Confidence Report on the Salt Lake City utilities site to identify required contaminants and monitoring schedules.
  2. If you need sample-level data, contact the Department of Public Utilities via the utilities contact page and request the lab report or chain-of-custody documentation.
  3. If the city cannot provide the data, submit a public records request under the city records policy (details on the city site).
  4. If you suspect a violation or public-health risk, file a complaint with the Utah Division of Drinking Water for state review and potential enforcement.
Public records requests can be used to obtain sample-level lab data when not published online.

FAQ

Where can I find the Salt Lake City annual water quality report?
The report is published on the Salt Lake City Department of Public Utilities water quality or drinking water pages with the most recent Consumer Confidence Report and system contact information.[1]
How do I get test results for my tap water?
Request sample-level results from Salt Lake City Utilities or submit a public records request; if the system is regulated by the state, the Utah Division of Drinking Water can also assist.[2]
Who enforces drinking water standards?
Salt Lake City operates the municipal system; the Utah Division of Drinking Water enforces state and federal standards and issues orders when violations occur.[2]

How-To

  1. Identify the water system name serving your address (check your water bill or the utilities site).
  2. Download the latest Consumer Confidence Report from the Salt Lake City utilities page to view system-wide monitoring results.
  3. Contact the Department of Public Utilities to request sample-level lab reports or to ask about recent tests.
  4. If you suspect noncompliance, file a complaint with the Utah Division of Drinking Water for an investigation.
  5. Follow up for results, corrective actions, or public notices and retain copies for your records.

Key Takeaways

  • Start with the municipal Consumer Confidence Report for system-level results.
  • Contact Salt Lake City Utilities or the Utah Division of Drinking Water for sample-level data and complaints.
  • Use public records requests if sample reports are not published online.

Help and Support / Resources

  1. [1] City of Salt Lake City Department of Public Utilities - Water Quality
  2. [2] Utah Division of Drinking Water

Categories

General Governance and Administration Public Safety Public Health and Welfare Land Use and Zoning Housing and Building Standards Transportation Environmental Protection Parks and Public Spaces Business and Consumer Protection Taxation and Finance Labor and Employment Education Civil Rights and Equity Elections and Campaign Finance Events and Special Uses Signs and Advertising Utilities and Infrastructure Technology and Data