Who enforces Irving's stormwater rules?

Public Works/Stormwater and Code Compliance enforce stormwater and illicit discharge rules; complaints can be filed through city contact pages.

Do I need a permit to connect to the sanitary sewer?

Yes, most sewer connections require permits and inspections; contact Development Services or Utilities for application requirements.

What if I find a spill or illicit discharge?

Report spills immediately to the City's emergency or Public Works contact; follow cleanup and reporting instructions from the city.

Irving Stormwater & Sewer Connection Checklist

Environmental Protection Texas 3 Minutes Read · published February 10, 2026

Introduction

Irving, Texas requires property owners and contractors to follow local stormwater management rules and permit rules for sewer connections to protect drains and water quality. This checklist summarizes the City of Irving's stormwater program, typical sewer-connection steps, enforcement routes, and where to find official forms and contacts. For program details see the City stormwater information and municipal code links below City of Irving Stormwater Program^[1] and the Irving Code of Ordinances Irving Code of Ordinances^[2].

What the rules cover

The rules cover prohibited discharges to the storm drain system, required best management practices (BMPs) during construction and landscaping, allowed connections to the sanitary sewer system, and reporting/inspection requirements for regulated sites.

Follow erosion controls and contain wash water at construction sites.

Pre-connection checklist

Obtain required permits from Development Services or Utilities before any sanitary sewer tie-in.
Confirm sewer lateral location and capacity with the Utilities division.
Prepare erosion and sediment control plans (for construction) and stormwater BMPs.
Budget for permit fees, inspection fees, and possible impact fees as required by the city.
Schedule required inspections and utility tie-in appointments through the City contact points.

Penalties & Enforcement

Enforcement is typically carried out by the City of Irving Public Works and Code Compliance divisions, with support from Utilities where sewer connections are involved. Official ordinance text and enforcement provisions are maintained in the Irving Code of Ordinances and the city's stormwater program pages.^[2]

Fine amounts: not specified on the cited page.
Escalation: first, repeat, and continuing violations - not specified on the cited page.
Non-monetary sanctions: stop-work orders, required remediation, administrative orders, and civil action are described as enforcement tools; exact remedies and processes are in the municipal code.^[2]
Enforcer and inspections: Public Works/Stormwater and Code Compliance perform inspections and accept complaints via official city contacts.^[1]
Appeals/review: appeal routes are provided by city ordinance or administrative procedures; specific time limits for appeals are not specified on the cited page.
Defences/discretion: documented permits, approved variances, or emergency measures may be accepted; check the ordinance and permit conditions for specific defenses.

If you receive a notice, act quickly to schedule inspections and to remediate any violations.

Applications & Forms

Relevant application forms for sewer connections, utility service, and construction permits are published by the City of Irving Development Services and Utilities divisions. If a specific form or fee is not visible on the cited pages, it is not specified on the cited page and applicants should contact the listed department for the current form and fee schedule.^[1]

How-To

Confirm whether your project needs a stormwater or sewer permit by contacting Development Services or Utilities.
Prepare and submit permit applications, plans, and erosion-control BMPs to Development Services.
Pay fees and schedule required inspections with the Utilities or Public Works division.
Complete required work, pass inspections, and obtain final approvals prior to connection or discharge.

FAQ

Who enforces Irving's stormwater rules?: Public Works/Stormwater and Code Compliance enforce stormwater and illicit discharge rules; complaints can be filed through city contact pages.^[1]
Do I need a permit to connect to the sanitary sewer?: Yes, most sewer connections require permits and inspections; contact Development Services or Utilities for application requirements.^[1]
What if I find a spill or illicit discharge?: Report spills immediately to the City's emergency or Public Works contact; follow cleanup and reporting instructions from the city.

Key Takeaways

Obtain permits before work begins to avoid enforcement actions.
Use BMPs and erosion controls for all construction affecting stormwater.