Schedule Fuel Pump Accuracy Test - Fort Worth

Business and Consumer Protection Texas 3 Minutes Read ยท published February 06, 2026 Flag of Texas

In Fort Worth, Texas, businesses that sell motor fuel must ensure dispensers deliver accurate volumes. This guide explains who enforces pump accuracy, how to schedule an inspection, what to expect during testing, and practical steps to stay compliant with local and state weights-and-measures rules.

Schedule tests during low-sales hours to reduce customer disruption.

Who Enforces Fuel Pump Accuracy

The primary enforcement usually involves municipal code compliance working with state weights-and-measures authorities. In Fort Worth, the Code Compliance division coordinates with Texas weights-and-measures programs for device testing and certification. If you operate multiple sites, keep device records and service logs available for inspectors.

How to Schedule an Accuracy Test

Follow these steps to schedule a pump accuracy test and prepare your site:

  • Contact the City of Fort Worth Code Compliance or the designated local weights-and-measures office to request an inspection.
  • Have device identification available: manufacturer, model, serial number, and meter calibration records.
  • Propose several available dates and request any pre-inspection checklists the inspector uses.
  • Confirm fees, if any, for testing or re-tests before the inspector arrives.

Penalties & Enforcement

Enforcement covers inaccurate dispensers, missing seals, tampering, and false advertising of fuel quantity. Specific monetary penalties and escalation procedures vary by enforcing authority and are not fully published on a single municipal page.

Failing an accuracy test can require immediate correction and re-inspection.
  • Fines: amounts for violations are not specified on the cited page; check the enforcing office for current schedules.
  • Escalation: first offence, repeat offences, and continuing violations are handled per administrative rules or municipal code; specific ranges are not specified on the cited page.
  • Non-monetary sanctions: orders to repair or remove equipment from service, seizure of tampered devices, stop-sale orders, and referral to municipal court.
  • Enforcer: City of Fort Worth Code Compliance and the state weights-and-measures program; file complaints through the city code compliance contact channels.
  • Appeals: administrative review or municipal court processes may apply; exact time limits for appeals are not specified on the cited page.

Applications & Forms

Device registration, inspection request forms, or testing fee schedules may be available from the municipal compliance office or the state weights-and-measures agency. Specific form names and fees are not specified on the cited page; contact the enforcing office to obtain the correct application and submission instructions.

How-To

  1. Gather dispenser records: model, serial numbers, maintenance and calibration logs.
  2. Contact the Code Compliance division to request an inspection appointment.
  3. Prepare the site: ensure clear access to dispensers, adequate lighting, and that pumps are operational for test measurements.
  4. Accompany the inspector and provide requested documents; note any adjustments or seals applied.
  5. If repairs are required, arrange certified service and schedule a re-test as instructed by the inspector.
Keep a copy of every inspection certificate and repair invoice for at least two years.

FAQ

Who inspects fuel pumps in Fort Worth?
The Code Compliance division coordinates inspections; state weights-and-measures authorities may perform or certify testing.
How often must pumps be tested?
Testing frequency depends on local rules and state requirements; a regular schedule or after repairs is typical, but exact intervals are not specified on the cited page.
What happens if a pump fails?
The inspector may require immediate repair, seal the device out of service, levy fines, and require a re-test before return to service.

Key Takeaways

  • Maintain clear records of device IDs and calibration to streamline inspections.
  • Schedule tests during low sales periods to minimize disruption.
  • Contact Fort Worth Code Compliance for bookings and the state weights-and-measures program for technical requirements.

Help and Support / Resources

Categories

General Governance and Administration Public Safety Public Health and Welfare Land Use and Zoning Housing and Building Standards Transportation Environmental Protection Parks and Public Spaces Business and Consumer Protection Taxation and Finance Labor and Employment Education Civil Rights and Equity Elections and Campaign Finance Events and Special Uses Signs and Advertising Utilities and Infrastructure Technology and Data