Aurora Sewer Connection Fees & Application Guide

Aurora, Illinois residents and contractors planning a new sewer connection or service change must follow city permitting rules, pay applicable fees, and coordinate inspections with the Public Works or Building divisions. This guide summarizes where fees and permit requirements are set, how to apply, typical enforcement and appeal routes, and practical steps to complete a connection in Aurora. Official sources are cited and content is current as of February 2026 when a specific page date is not shown.

Overview

Sewer connection requirements in Aurora are governed by the city code, permit rules, and the Public Works utilities practice. Connection fees and tap charges are set by the city's utility rate and fee schedules or specific ordinances; exact amounts are published in official rate schedules or permit fee tables when available. For ordinance text and local code provisions see the municipal code and Public Works policy pages cited below.^{[1] [2]}

Penalties & Enforcement

The City of Aurora enforces sewer and sanitary regulations through its Public Works and Building/Inspections departments and may pursue administrative penalties, stop-work orders, or legal action for noncompliance. Where exact fine amounts or escalation steps are not given on the cited pages, this guide notes that the amount is "not specified on the cited page." Current enforcement contact and procedure details are provided in the official links below.

• Enforcer: Public Works - Utilities and Building Inspections are the primary enforcing departments; complaints are routed through official department contacts.
• Fines: specific dollar amounts for violations are not specified on the cited page.
• Escalation: first, repeat, or continuing offence escalation ranges are not specified on the cited page.
• Non-monetary sanctions: stop-work orders, correction notices, required corrective works, lien or civil action, or referral to court.
• Inspection & complaints: report problems to Public Works or Building Inspections via official contact pages linked below.

Applications & Forms

The city publishes permit and utility application processes through the Building Inspections and Public Works/Utility Billing offices. Specific form names or numbers for a sewer connection permit are not consistently published on a single page; if a named "Sewer Service Connection" form is required, the form is available from the Building or Public Works permitting counter or online permit portal per department guidance. If a published form or fee schedule is needed and not found on the cited pages, the item is "not specified on the cited page."

• Typical form: sewer connection permit or plumbing permit from Building Inspections (name/number not specified on the cited page).
• Fees: connection/tap fees and permit fees are set in the utility fee schedule or ordinance; see official rate documents for amounts.
• Submission: applications and permit payments are submitted to Building Inspections or Public Works per the department instructions on the official site.

How to

This section gives step-by-step actions to apply for a sewer connection in Aurora and obtain inspections.

1. Confirm jurisdiction and required permit type with Building Inspections or Public Works.
2. Obtain and complete the applicable permit or application form; include plans, contractor license, and property details.
3. Pay application and connection fees as indicated on the utility rate or permit fee schedule.
4. Schedule inspections with Public Works or Building Inspections after completing physical connection work.
5. If denied or contested, file an administrative appeal following the department's appeal procedure within the time limit stated on the decision (time limits are not specified on the cited page).

Common Violations

• Illegal connection or unauthorized tapping of the sewer main.
• Failure to obtain required permits before work begins.
• Failure to schedule or pass required inspections.

FAQ

How much does a sewer connection cost in Aurora?

The exact connection fee and tap charges are published in the city utility fee schedule or permit fee list; the specific dollar amount is not specified on the cited page.^[1]

Who issues sewer connection permits?

Building Inspections or Public Works issues permits and coordinates inspections for sewer connections in Aurora; contact details are on the official department pages.^[2]

What penalties apply for illegal connections?

Non-monetary actions such as stop-work orders and corrective orders are used; exact fine amounts and escalation are not specified on the cited pages.

How-To

1. Verify permit requirements with Aurora Building Inspections or Public Works.
2. Complete and submit the sewer connection or plumbing permit with required documentation.
3. Pay fees per the published rate schedule and schedule inspections.
4. Pass inspections and retain final approval documentation.
5. If necessary, file an appeal following the department's procedure.

Key Takeaways

• Always confirm permit type and fee schedule with City departments before starting work.
• Fees are published in official rate documents; specific dollar values may not appear on a single page.
• Enforcement includes stop-work orders and corrective actions; fines are not specified on the cited pages.

Help and Support / Resources

• City of Aurora - Public Works
• Aurora Municipal Code (library.municode.com)
• City of Aurora - Building Inspections
• City of Aurora - Utility Billing

1. [1] Aurora Municipal Code - Code of Ordinances
2. [2] City of Aurora - Public Works