Sandy Springs Campaign & For-Sale Sign Rules

Signs and Advertising Georgia 3 Minutes Read · published March 01, 2026 Flag of Georgia

Sandy Springs, Georgia regulates campaign signs and for-sale signs through local sign rules and permitting processes to balance free speech with public safety and zoning. This guide summarizes where signs are allowed, typical size and placement limits, enforcement channels, and practical steps to place, remove, or contest signage in Sandy Springs.

Where campaign and for-sale signs are allowed

Signs on private property generally require the property owner’s permission and must meet size, setback, and illumination rules that distinguish residential from commercial districts. Signs in the public right-of-way are usually restricted or prohibited to protect sightlines and pedestrian safety.

For official code language and zoning-specific provisions, consult the city sign regulations and zoning chapters.[1] For permitting procedures and submittal requirements, see the Planning & Development sign permit pages.[2]

Always get the landowner's written permission before placing a sign on private property.

Key restrictions commonly enforced

  • No signs in most public rights-of-way, medians, or on light poles unless expressly permitted.
  • Temporary campaign or real estate signs often have maximum sizes and limited display durations.
  • Illuminated or attached signs may be subject to additional electrical and building permit rules.
  • Election-period exceptions sometimes apply to campaign signs; check local code and election schedules.

Penalties & Enforcement

Enforcement is typically handled by the City of Sandy Springs Planning & Development or Code Compliance division, which responds to complaints, inspects sites, and issues notices. Where the municipal code sets fines or procedures, those provisions control; if not, enforcement may proceed via administrative notices or municipal court.

  • Fines: not specified on the cited page; check the cited municipal code and permit pages for any stated penalties.[1]
  • Escalation: first, repeat, or continuing offence escalation amounts and per-day fines are not specified on the cited page.
  • Non-monetary sanctions: removal orders, administrative compliance orders, seizure/removal of signs by the city, and referral to municipal court are possible remedies; specific procedures are not fully specified on the cited page.
  • Enforcer and complaint pathway: contact Planning & Development or Code Compliance to report violations and request inspections.[2]
  • Appeals and review: the cited pages do not specify appeal time limits or administrative review procedures; appeal routes may include municipal court or an administrative hearing depending on the enforcement notice.
If you receive an enforcement notice, act promptly to meet any removal or correction deadlines.

Applications & Forms

Sign permit forms, submittal checklists, and application requirements are maintained by the City of Sandy Springs Planning & Development. Where a formal sign permit is required, the permit page lists the application, required drawings, and submission method. If no permit is required for temporary campaign or for-sale signs in a specific zone, the permit page will state that information.[2]

Common violations and typical outcomes

  • Placement in the public right-of-way — may result in removal order and possible fine.
  • Oversized signs in a residential district — may trigger permit denial and compliance order.
  • Failure to remove temporary signs after the allowed display period — may lead to daily fines or removal by the city.
Keep dated photos and permission records to contest a removal or citation.

FAQ

Do I need a permit for a campaign sign on private property?
It depends on size, location, and zoning; consult the city sign permit page and local code for specifics.[2]
Can I place a for-sale sign in the public right-of-way?
No, signs in the public right-of-way are typically prohibited and may be removed; check the municipal code for exceptions.[1]
Who enforces sign rules in Sandy Springs?
Planning & Development and Code Compliance handle inspections and enforcement; complaints are filed through the city’s official reporting channels.[2]

How-To

  1. Check the City of Sandy Springs sign regulations and zoning chapter to confirm whether a permit is required and what limits apply.[1]
  2. If a permit is required, download the sign permit application and submittal checklist from Planning & Development and prepare scaled drawings.
  3. Submit the application and pay any applicable fees as instructed on the permit page; retain the permit on site if required.
  4. Place signs only where allowed, comply with size and setback rules, and remove temporary signs promptly after the event or sale.
  5. To report a sign violation or request an inspection, contact Code Compliance or Planning & Development through the official city reporting form or phone contacts.

Key Takeaways

  • Get property owner permission and check zoning before placing any sign.
  • Temporary signs often have display-time limits; remove promptly to avoid enforcement.
  • Use official Planning & Development or Code Compliance channels for permits and complaints.

Help and Support / Resources

  1. [1] City of Sandy Springs - Code of Ordinances (sign regulations and zoning)
  2. [2] City of Sandy Springs - Planning & Development (sign permits and forms)

Categories

General Governance and Administration Public Safety Public Health and Welfare Land Use and Zoning Housing and Building Standards Transportation Environmental Protection Parks and Public Spaces Business and Consumer Protection Taxation and Finance Labor and Employment Education Civil Rights and Equity Elections and Campaign Finance Events and Special Uses Signs and Advertising Utilities and Infrastructure Technology and Data