Sign Permit Size & Height Rules - Pembroke Pines

Signs and Advertising Florida 3 Minutes Read · published February 21, 2026 Flag of Florida

Pembroke Pines, Florida regulates sign size, height, placement and permitting through its municipal code and permitting process. Developers, businesses and residents should check the city code for zoning-specific allowances and restrictions before fabricating or installing any freestanding, wall, projecting or temporary sign. The municipal code consolidates dimensional tables and sign-area formulas for commercial, residential and corridor zoning; for the controlling ordinance text see the city code online[1].

Standards for Size, Height, and Placement

General rules vary by zoning district and by sign type (wall, freestanding/pylon, monument, awning, window, directional, and temporary). Maximum sign area and height commonly depend on lot frontage, building face, and permitted sign type. The municipal code should be consulted to determine the precise square-foot limits and maximum heights assigned to each district.[1]

  • Wall signs: maximum area tied to linear building frontage or percentage of façade (varies by zone).
  • Freestanding/monument signs: height and base requirements set per zoning; some corridors limit height more strictly.
  • Temporary and special event signs: time-limited displays and location restrictions apply.
  • Visibility and setback: signs must meet sight-line, setback, and separation rules from streets, sidewalks and intersections.
Always verify the zoning district rules before ordering a sign.

Penalties & Enforcement

Enforcement of sign regulations is handled by the City’s code enforcement and building/permitting divisions; complaints and inspection requests are accepted by the city’s Code Compliance office.[2]

Specific fine amounts, escalation for repeat or continuing offenses, and exact non-monetary sanctions are not specified on the cited municipal pages or consolidated permit pages and should be confirmed with the Code Compliance or Building Division.[1]

  • Monetary fines: not specified on the cited page; contact Code Compliance for current penalty schedules.
  • Escalation: information about first, repeat or continuing offence ranges is not specified on the cited page.
  • Non-monetary actions: removal orders, stop-work directives or civil enforcement actions may be used; see Code Compliance for procedures.
  • Enforcer and complaints: Code Compliance / Building Division handles inspections and complaints; contact details available via the city site.[2]
  • Appeals and review: time limits and appeal routes are not specified on the cited page; ask the Building or Code Compliance office for appeal procedures.
If a sign is installed without a permit, contact Code Compliance promptly to learn corrective steps.

Applications & Forms

Official permit application names, form numbers, and current fees are not consolidated on the municipal code page; applicants should request the sign or building permit application and fee schedule from the Building Division or Planning Department. Permit submittal often requires site plans, elevation drawings, structural calculations (for tall or illuminated signs), and proof of contractor licensing — confirm exact submittal requirements with the Building Division.[1]

How-To

  1. Determine your property’s zoning and permitted sign types from the municipal code or zoning map.
  2. Measure building frontage and proposed sign area to verify compliance with area and height limits.
  3. Prepare a site plan, elevations, and structural details if required; gather contractor license and owner authorization.
  4. Apply for a sign or building permit with the Building Division; pay required fees and await plan review.
  5. Schedule inspections as directed; do not install until permit approval and inspections are complete.

FAQ

Do I need a permit for a wall sign?
Most permanent wall signs require a permit; confirm size and mounting rules with the Building Division and municipal code.[1]
What height can a freestanding sign be?
Maximum freestanding sign heights depend on zoning and frontage and are set in the municipal code; check the applicable district rules.[1]
Who enforces sign rules and how do I report a violation?
The City’s Code Compliance or Building Division enforces sign rules; use the city’s Code Compliance contact page to file complaints or request inspections.[2]

Key Takeaways

  • Rules vary by zoning and sign type—always confirm before ordering signs.
  • Obtain required permits and documentation to avoid removal or enforcement action.

Help and Support / Resources

  1. [1] City of Pembroke Pines Code of Ordinances - Signs and zoning provisions
  2. [2] City of Pembroke Pines Code Compliance Division - complaints and contact

Categories

General Governance and Administration Public Safety Public Health and Welfare Land Use and Zoning Housing and Building Standards Transportation Environmental Protection Parks and Public Spaces Business and Consumer Protection Taxation and Finance Labor and Employment Education Civil Rights and Equity Elections and Campaign Finance Events and Special Uses Signs and Advertising Utilities and Infrastructure Technology and Data