Miramar Sign Permit & Size Limits - City Regulations

Land Use and Zoning Florida 3 Minutes Read ยท published February 21, 2026 Flag of Florida

This guide explains sign permit requirements, size limits, and enforcement for Miramar, Florida. It summarizes where to apply, what measurements matter, common exemptions, and how the city enforces sign rules under the municipal code. Use this page to identify the likely permit type, prepare required documents, and start an application with Miramar Development Services or Code Compliance.

Penalties & Enforcement

The City enforces sign regulations through its municipal code and Code Compliance processes; see the city code for the controlling provisions[1]. Exact fine amounts and schedules are not specified on the cited code page.

  • Fines: not specified on the cited page; see the municipal code for statutory language and penalty provisions[1].
  • Escalation: the code describes violations and remedies but a first/repeat/continuing offence breakdown is not specified on the cited page.
  • Non-monetary sanctions: the city may issue removal orders, stop-work orders, and pursue code enforcement hearings or civil actions as provided in the municipal code[1].
  • Enforcer and complaints: Code Compliance (City of Miramar) handles inspections and complaints; file a complaint or request inspection via the city Code Compliance contact page[2].
  • Appeals and review: appeal routes are governed by the municipal code and administrative procedures; specific time limits for appeals are not specified on the cited code page.
If you receive a notice, act promptly to request a hearing or apply for a variance.

Applications & Forms

Sign permits are generally processed through the Building or Development Services division. The municipal code sets standards for sign type, placement, and size; the city provides application forms on its permit pages or at the Building counter. Exact form names, numbers, fees, and submittal instructions are not fully specified on the cited code page and should be confirmed with Building Services or the Permit Center.[1]

Common rules and size limits

Miramar regulates sign area, height, and placement by zoning district and sign type (wall, freestanding, projecting, temporary). Dimension rules and permitted zones are detailed in the land development or sign regulations in the municipal code[1]. When in doubt, request a pre-application meeting with Planning/Building.

  • Permit required: most permanent signs require a permit and site plan review.
  • Measurements: sign area typically uses overall face dimensions; local definitions control whether frames/structures count.
  • Temporary signs: time limits and quantity limits commonly apply; check local rules in the municipal code.
Measure signs before applying to avoid rework on permit plans.

How to comply and take action

  • Pre-apply: consult Planning or Building for zoning confirmation and required documentation.
  • Submit: file the sign permit application with site plans, elevations, and electrical plans if sign is illuminated.
  • Fees: pay applicable permit fees at time of submission; specific fee amounts should be confirmed with the Building/Permits office.
  • Inspection: schedule inspections for electrical and structural compliance where required.

FAQ

Do I need a permit to install a new business sign?
Most permanent signs require a permit; verify zoning allowances and submit plans to Building/Development Services.
Are temporary signs allowed without a permit?
Temporary signs are often allowed with limits on size and duration; check the municipal code or contact Planning for specifics.
What happens if my sign is cited by Code Compliance?
You may receive an order to comply or remove the sign; follow the notice instructions and contact Code Compliance to request an inspection or discuss appeals.

How-To

  1. Confirm zoning for your property with Planning or the permit counter.
  2. Prepare sign drawings showing dimensions, materials, mounting details, and electrical plans if required.
  3. Complete and submit the sign permit application and pay fees at the Building/Permits office.
  4. Schedule required inspections and correct any deficiencies noted by inspectors.
  5. If cited, request an administrative hearing or follow the appeal instructions on the notice.

Key Takeaways

  • Most permanent signs need a permit and must meet size and placement rules in the municipal code.
  • Contact Code Compliance for complaints and Building/Permits for applications.
  • Document and measure signs before applying to avoid delays.

Help and Support / Resources

  1. [1] Miramar Municipal Code - Code of Ordinances
  2. [2] City of Miramar - Code Compliance

Categories

General Governance and Administration Public Safety Public Health and Welfare Land Use and Zoning Housing and Building Standards Transportation Environmental Protection Parks and Public Spaces Business and Consumer Protection Taxation and Finance Labor and Employment Education Civil Rights and Equity Elections and Campaign Finance Events and Special Uses Signs and Advertising Utilities and Infrastructure Technology and Data