Coral Springs Sign Permits & Size Limits

Land Use and Zoning Florida 3 Minutes Read · published February 21, 2026 Flag of Florida

In Coral Springs, Florida, signs are regulated by the city code to control size, location, and permits for commercial, residential, and temporary signage. Property owners and businesses must follow district-specific dimensional rules and obtain required permits before installing most signs. This guide summarizes where to find the ordinance, how permits and appeals work, common violations, and practical steps to comply with Coral Springs sign regulations.

Where the Rules Live

The City of Coral Springs Code of Ordinances contains the sign regulations and district-specific size and placement standards. For authoritative text and any map-based district rules, consult the municipal code directly[1].

Types of Signs and District Limits

Sign types commonly regulated by the code include wall signs, freestanding/monument signs, canopy and awning signs, temporary banners, directional signs, and construction/site signs. Dimensional limits, height caps, and required setbacks vary by zoning district and by sign type. Review the code section for the applicable zoning district and the definitions section for exact sign type definitions.

  • Wall signs: area measured in square feet per linear foot of building frontage.
  • Freestanding signs: height and sign face area limited by district.
  • Temporary signs: separate short-term allowances and display periods.
Always confirm the measuring method in the code before ordering fabrication.

Permits & Zoning Approvals

Most permanent signs require a sign permit and a plan review by the Building or Planning department. Some signs may also require a zoning variance or administrative approval if they exceed dimensional limits or are located in special districts.

  • Permit application: submit plans, elevations, and site plan showing sign location.
  • Fees: plan review and permit fees apply as listed by the Building Division.
  • Processing times: vary by application completeness and review queues.

Penalties & Enforcement

Enforcement is handled by the City’s Code Compliance and Building departments; penalties, abatement procedures, and appeal rights are set out in the municipal code or related enforcement regulations. Specific fine amounts, escalation for repeat or continuing violations, and non-monetary sanctions should be confirmed in the code text cited below[1].

  • Monetary fines: not specified on the cited page.
  • Escalation: first, repeat, and continuing violation procedures not specified on the cited page.
  • Non-monetary remedies: removal orders, stop-work directives, and court enforcement are referenced in code enforcement provisions.
  • Enforcer: Code Compliance and Building Division handle inspections and notices; use official contact channels to report violations.
  • Appeals: administrative appeal or code enforcement hearing procedures apply; see the code for time limits and filing requirements.
If you receive a notice, act promptly to file an appeal or cure the violation within stated deadlines.

Applications & Forms

The city publishes sign permit application forms and plan submission requirements through the Building or Planning division. If a specific form number or fee is not listed on the municipal code page, check the Building/Planning department pages for the current application and fee schedule[1].

  • Sign Permit: see the Building Division for application, submittal checklist, and digital upload instructions.
  • Payment: fees paid at permit issuance; confirm amount on the Building Division fee schedule.
  • Deadlines: remedy periods for violations and appeal filing windows are set by enforcement procedures in the code.
Forms and fee schedules are maintained by the Building Division and may change annually.

Common Violations

  • Unpermitted signs installed without a sign permit.
  • Signs exceeding maximum area or height for the zoning district.
  • Temporary signs displayed beyond the allowed display period.

Action Steps

  • Confirm sign type and district rules in the municipal code.[1]
  • Prepare plans and photographs; submit a complete sign permit application to the Building Division.
  • If cited, follow the notice instructions, cure noncompliance, or file an appeal within the code’s specified timeframe.

FAQ

Do I always need a permit for a sign?
Most permanent and many temporary signs require a permit; small exempt signs may be listed in the code and vary by district.
How do I measure sign area?
The municipal code defines the measuring method for each sign type; check the definitions and measurement rules in the sign section.
What if my sign exceeds the size limit?
You may apply for a variance or administrative relief if authorized by the code; otherwise you must modify the sign to comply.

How-To

  1. Identify your property zoning and review the sign standards for that district.
  2. Prepare scaled drawings showing sign dimensions and location on the building or site plan.
  3. Submit the sign permit application to the Building Division and pay any required fees.
  4. Schedule inspections as required and obtain final sign approval before activating electrical signage.

Key Takeaways

  • Check district rules before designing a sign to avoid remodel costs.
  • Permit processing and appeals follow timelines in the municipal code; act promptly on notices.

Help and Support / Resources

  1. [1] City of Coral Springs Code of Ordinances - Signs and Zoning

Categories

General Governance and Administration Public Safety Public Health and Welfare Land Use and Zoning Housing and Building Standards Transportation Environmental Protection Parks and Public Spaces Business and Consumer Protection Taxation and Finance Labor and Employment Education Civil Rights and Equity Elections and Campaign Finance Events and Special Uses Signs and Advertising Utilities and Infrastructure Technology and Data