Denver Contractor Fire Inspection Checklist (PDF)

Public Safety Colorado 3 Minutes Read ยท published February 07, 2026 Flag of Colorado

This guide explains how contractors in Denver, Colorado prepare and submit a fire inspection checklist PDF, what the city inspects, and how enforcement and appeals work. It focuses on practical steps for contractors to obtain permits, schedule inspections, and meet Denver fire-safety requirements so projects pass inspections and avoid enforcement actions.

Overview

Contractors performing work that affects fire protection systems, egress, fire alarms, sprinklers, or hazardous materials must follow Denver rules on permits and inspections. Typical uses of a contractor checklist include new construction, system modifications, and final occupancy inspections.

Penalties & Enforcement

Enforcement is administered under Denver municipal authority and by the Denver Fire Department. Specific monetary fine amounts for contractor inspection noncompliance are not specified on the cited page; see the municipal code for controlling provisions. Denver Revised Municipal Code[1]

  • Fine amounts: not specified on the cited page; consult the code or enforcement notices.[1]
  • Escalation: first/repeat/continuing offence procedure is not specified on the cited municipal summary.[1]
  • Non-monetary sanctions: orders to correct, stop-work orders, withholding of occupancy, and court actions are used by enforcement authorities.[1]
  • Enforcer: Denver Fire Department, Fire Prevention Division; contact and department information are available on the city site. Denver Fire Prevention[3]
If a fine or specific penalty is required for your case, request the citation details from Fire Prevention.

Applications & Forms

Permit applications, plan review instructions, and many fire permit forms are published by Denver Fire Prevention. Contractors should use the city plan-review and permit pages to download forms, submit plans, and pay fees online. Plan review & permit information[2]

  • Common forms: permit application and plan submittal checklist; specific form names and numbers are published on the plan-review page.[2]
  • Fees: fee schedules are posted with permit pages or plan review instructions; if not visible, contact Fire Prevention.[2]
Always confirm the current permit form and fee on the official plan-review page before submission.

Inspection Process & Common Violations

Inspections typically verify compliant installation and operation of alarms, sprinklers, fire doors, emergency lighting, and required signage. Inspectors may check permits on site and compare installation to approved plans.

  • Common violations: blocked egress, missing or obstructed fire extinguishers, improper sprinkler modifications, missing permits, and non-functional fire alarms.
  • Documentation violations: absent or incomplete test reports, missing as-built plans, or incomplete contractor checklists.
  • Work without permit: performing regulated alterations without a permit can trigger stop-work orders and additional penalties.
Keep a dated copy of the submitted checklist and plan approvals on site for the inspector.

Action Steps for Contractors

  • Download the official checklist PDF and read instructions before starting work.
  • Submit required plans and permit applications online and schedule the inspection per the plan-review instructions.[2]
  • Prepare documentation: test reports, cut sheets, contractor checklist, and as-built drawings.
  • If cited or ordered to correct, contact Denver Fire Prevention for the citation details and appeal procedures.[3]

FAQ

Do contractors need a special fire inspection checklist for Denver?
Yes. Contractors should use the city checklist where required and follow plan-review and permit instructions on the Denver Fire Prevention pages.
Where do I submit the checklist and permit application?
Submit plans and permit applications via the Denver plan-review and permits portal; follow the instructions on the plan-review page for file format and fees.
How long to appeal an enforcement order?
Time limits for appeals are set by the issuing notice or municipal procedures; specific deadlines are not specified on the cited summary pages and should be confirmed with Fire Prevention.

How-To

  1. Download the contractor fire inspection checklist PDF from the Denver Fire Prevention plan-review page.
  2. Complete the checklist and assemble required test reports, drawings, and permit application materials.
  3. Submit plans and pay fees through Denver's plan-review and permit submission process.
  4. Schedule the inspection online and have the checklist and documents available on site for the inspector.
  5. If you receive a correction notice, follow the correction instructions, reschedule any re-inspection, or contact Fire Prevention for appeal guidance.

Key Takeaways

  • Use the official checklist and submit plans before beginning regulated work.
  • Noncompliance can lead to stop-work orders and other sanctions; check with Fire Prevention if unsure.

Help and Support / Resources

  1. [1] Denver Revised Municipal Code - Code of Ordinances
  2. [2] Denver Fire Department - Plan review & permits
  3. [3] Denver Fire Prevention - Contact & services

Categories

General Governance and Administration Public Safety Public Health and Welfare Land Use and Zoning Housing and Building Standards Transportation Environmental Protection Parks and Public Spaces Business and Consumer Protection Taxation and Finance Labor and Employment Education Civil Rights and Equity Elections and Campaign Finance Events and Special Uses Signs and Advertising Utilities and Infrastructure Technology and Data