Peoria Energy Conservation Code Requirements

Introduction

Peoria, Arizona requires compliance with adopted energy conservation codes when applying for building permits for new construction, additions, and some alterations. This guide explains when energy code documentation and inspections are required, which city office enforces the rules, how to submit energy compliance forms with a permit application, and practical steps to avoid delays during plan review and inspections. Use the official City of Peoria resources and municipal code links cited below to confirm current requirements before you apply.

How the Energy Conservation Code Applies

Peoria enforces energy conservation requirements through its Building Safety and community development processes. The city adopts and enforces building codes and referenced energy standards for residential and commercial work; these requirements typically control insulation, fenestration, HVAC efficiency, duct sealing, lighting, and energy compliance documentation during plan review and inspection. For official scope and adopted editions consult the city Building Safety resources. City of Peoria Building Safety^[1]

When Energy Compliance Is Required

• New residential and commercial construction requires energy compliance documentation.
• Additions that increase conditioned floor area generally require compliance with current energy provisions.
• Alterations to HVAC, envelope, or lighting systems often trigger energy code plan review and inspections.

Plan Review & Documentation

Typical submittal items include energy code compliance forms or software reports (REScheck or COMcheck where applicable), HVAC sizing and efficiency documentation, insulation and fenestration schedules, and lighting power calculations for commercial projects. Plan reviewers check energy compliance during the building permit review process and inspectors verify installed features in the field.

Penalties & Enforcement

Enforcement of energy conservation code requirements is performed by the City of Peoria Building Safety Division and related community development enforcement staff. The municipal code establishes code adoption and enforcement authority; specific monetary penalties for energy code violations are not listed on the cited municipal code page and are therefore noted as not specified on the cited page. Peoria Municipal Code^[2]

• Fine amounts: not specified on the cited page; see municipal code or contact Building Safety for current penalty schedules.
• Escalation: first, repeat, and continuing offence ranges are not specified on the cited page.
• Non-monetary sanctions: stop-work orders, correction orders, required rework, withholding of final occupancy, and referral to court are used for noncompliance.
• Enforcer: City of Peoria Building Safety Division performs inspections and issues compliance orders; complaints may be submitted to the same department.
• Appeals: appeal or review routes are through the city appeals process or code official review; specific time limits for appeals are not specified on the cited page.
• Defences/discretion: variances, approved equivalencies, or alternative energy compliance methods may be available where permitted by the adopted code and city procedures.

Applications & Forms

The City publishes building permit application requirements and energy compliance submittal checklists through its Building Safety office. Typical documents are the building permit application, energy compliance reports (REScheck/COMcheck), and equipment specification sheets. Fees and submission methods are listed on the city permit pages; consult Building Safety for current fee schedules and e-permit submission instructions. City of Peoria Building Safety^[1]

Common Violations

• Missing or incorrect energy compliance reports at plan review.
• Insulation or air-sealing not installed to specified levels.
• Noncompliant HVAC equipment or incorrect efficiency documentation.
• Unapproved changes during construction without revised submittals.

Action Steps

• Before applying, confirm the adopted energy code edition with Building Safety.
• Prepare and upload energy compliance reports (REScheck/COMcheck) with permit plans.
• Schedule required energy-related inspections during construction and correct deficiencies promptly.

FAQ

When do I need to submit an energy compliance report?

You must submit energy compliance documentation with your building permit application for new construction, additions that increase conditioned floor area, and for many alterations to HVAC, envelope, or lighting systems.

Which software reports are accepted?

The city typically accepts REScheck for residential and COMcheck for commercial energy compliance reports; verify the required format with plan review staff.

What happens if an inspector finds noncompliant work?

Inspectors may issue a correction notice or stop-work order; you will be required to correct the work and schedule reinspection before proceeding.

How-To

1. Confirm the adopted energy code edition with Building Safety before preparing plans.
2. Prepare required energy compliance reports (REScheck/COMcheck) and include all supporting documents.
3. Submit the plans and energy documents through the city permit portal or as directed by Building Safety.
4. Address plan review comments promptly and resubmit corrected documents if requested.
5. Arrange and pass required inspections that verify installed energy measures.
6. Obtain final approval or certificate of occupancy only after all energy compliance items are accepted.

Key Takeaways

• Confirm the adopted code edition with Peoria Building Safety before applying.
• Include REScheck/COMcheck and equipment specs at submittal to avoid review delays.
• Contact Building Safety early for questions about variances, equivalency, or appeal procedures.

Help and Support / Resources

• City of Peoria Building Safety
• Peoria Permit Services
• Peoria Municipal Code
• Peoria Planning & Zoning